96- Well Magnetic Plates
Available in many configurations to best suit your labs need
X96 Dual Ring Magnetic Plate 96-well
Save deck space combining multiple plates into one with Permagen’s most universal ring magnet plate. From Low elution PCR applications up to 2 mL deep well, the X96 has you covered. No need to purchase two separate plates anymore. Smaller inner ring magnet allows for volumes as low as 5 µL, larger outer magnet handles up to 2 mL deep well
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom, ANSI/SBS on top to accept any microplate
Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable differences
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: A011623
X396 Combo 384-well/96-Well Magnetic Plate
Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 5 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom. ANSI/SBS footprint on top to accept all common microplates.
Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable inconsistencies
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: A040523
96-Well Universal Ring Magnetic Plate
Permagen’s most universal ring magnet plate. (Without Cushion) From PCR plates to almost any microplate
Available in three magnet strengths depending on your assay or protocol from 350 µL – 2 mL formats
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom, SBS/ SLAS fit on top to accept any microplate
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: U380 / U480 / U500
96-Well Ring Magnetic Plate
Preferred by most scientists, the ring magnet plate is a versatile product that can be used manually or in automated liquid handlers when separating beads into rings is essential.
Available in three magnet strengths like our U500 above
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: S380 / S480 / S500
96-Well Ring Magnetic Plate ref. A32782
Ideal magnet plate for those wishing to replace Beckman® PN: A32782. Features all the same dimensions and even the same magnets. Does not include the spring base but it is the same height. Perfect for those with robots that do not require springs.
Can be used for many other applications as well
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: T480
96-Well ring magnetic plate with integrated cushion base
Direct replacement magnet plate for Beckman® PN: A32782 (Our SKU: MSP480R). Comes with cushion base and same exact magnets.
Can be used for many applications, not limited to Beckman® Protocols
For faster separations you can upgrade to the MSP500R which comes with all of the same features, just stronger magnets
Like our ring magnet plates above, this plate comes in two magnet strengths.
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: MSP480R / MSP500R
96S Super Magnet Plate
Direct replacement magnet plate. Comes with spring cushion base and same exact magnets. Guaranteed to meet or exceed performance of Beckman Coulter®A32782 or Alpaqua®A001322 plate
For faster separations you can upgrade to the MSP500R which comes with all of the same features, just stronger magnets
Features include same color scheme, same height, width, and length for easy transition plug and play set-up. Compatible with any magnetic beads
SKU: A092722
96-Well Universal Bar Magnetic Plate
Permagen’s most universal bar magnet plate. From PCR plates to almost any microplate including deep well, flat bottom, pyramid bottom, round bottom, full-skirt PCR, and 1/2 skirt PCR the MSPU650 has you covered
SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom, SBS/ SLAS fit on top to accept any microplate
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: MSPU650
96-Well Universal Bar Magnetic Plate with Integrated Cushion base
Permagen’s MSPU650R is identical to the product shown above, with the exception of the added integrated cushion base, which helps aid in robot and consumable labware inconsistencies
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: MSPU650R
96-Well PCR Side Pull Bar Magnetic Plate
The Permagen 96-Well Side Pull Bar Magnet PCR Separation Plate was designed for use in manual or automation applications where pulling beads to one side of the wells is essential.
Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added two angled, partial frames around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets when using an automated liquid handling robot.
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: MSP750
96-Well PCR side pull bar magnetic plate with integrated cushion base
Permagen’s MSPU750R is identical to the product shown above, with the exception of the added integrated cushion base which helps aid in robot, and consumable labware inconsistencies
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: MSP750R
96-Well 0.2 mL PCR Strip Rack SBS/ SLAS Footprint
The Permagen 96-well 0.2 mL PCR Strip Rack was designed for use in manual or automation applications where strip tubes are required. It can also be used with our MSP750 MSP750R MSPU650R or MSPU650 magnet plates and is available as a discounted kit
Picture shown is SKU: MSP750KT for reference
SKU: MTP96
96-Well Low Elution Ring Magnetic Plate
Designed for those labs wishing to separate magnetic beads into rings.
The Permagen ring magnet low elution plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: RLE500
96-Well Low Elution Post Magnetic Plate
The Permagen Post magnet low elution plate was designed for use in manual or automation applications where volumes as low as 5 µL are required. The post magnets will create bead pellets to one quadrant of the well making aspiration easier and accidental bead disruption less likely
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
SKU: LE400
