96-Well Low Elution Magnet Plates
Permagen offers several Low Elution Plates in 96-, and 384-Well formats. They all feature the following benefits
- SBS/ANSI footprint to fit into Liquid Handling Robots
- Strong NdFeB magnets for rapid bead separation
- Gripper clearance for automation use
- Solid aluminum design for durability and consistent results
- Made in the USA
A011623
- ANSI/ SBS footprint
- Dual ring magnet technology
- Solid Aluminum alloy design
- Precision manufactured for more consistent results
- Fast magnetic bead separations
- Made in USA
- For Research use only
- Round bottom plates
- Pyramid bottom plates
- Flat Bottom plates
- Deep well plates
- Full-, Semi-, and un-Skirted PCR Plates
- Any magnetic beads
- Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.
Maximum – 2 mL (deep well plate
Minimum – 5 µL (pcr plate, or tubes with kit)
X96 Dual Ring Magnetic Plate 96-well
Permagen’s most universal ring magnet plate. From Low elution PCR applications up to 2 mL deep well, the X96 has you covered. No need to purchase two separate plates anymore. Smaller inner ring magnet allows for volumes as low as 5 µL (from PCR plates), larger outer magnet handles up to 2 mL deep well assays
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom, SBS/ SLAS fit on top to accept any microplate
Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable differences
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
A040523
- ANSI/ SBS footprint
- Compatible with 384-well and 96-well plates
- Solid Aluminum alloy design
- Precision manufactured for more consistent results
- Fast magnetic bead separations
- Made in USA
- For Research use only
- 384-well pcr plates
- Some 384-well deep well plates
- Full-, Semi-, and un-Skirted 96-well PCR Plates
- Any magnetic beads
- Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.
384-Well PCR
Maximum – 39 µL
Minimum – 5 µL
__________
96-Well PCR
Maximum – 60 µL (0.2 mL for some beads)
Minimum – 4 µL
X396 Combo 384-well/96-Well Magnetic Plate
Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 5 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom. ANSI/SBS footprint on top to accept all common microplates.
Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable inconsistencies
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
RLE500
- SBS/ SLAS footprint
- Solid Aluminum alloy design
- Precision manufactured for more consistent results
- Fast magnetic bead separations
- Integrated bracket to help keep microplate in place and flat
- Made in USA
- For Research use only
- Full- skirt PCR plates
- 1/2- skirt PCR plates
- Un-skirted PCR plates
- Any magnetic beads
- Any common liquid handlers i.e. SPTLabtech Firefly®, Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.
Maximum – 150 µL
Minimum – 5 µL
96-Well Low Elution Ring Magnetic Plate
Designed for those labs wishing to separate magnetic beads into rings.
The Permagen ring magnet low elution plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation
SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
RLE500R
- SBS/ SLAS footprint
- Integrated cushion base for precise pipetting
- Solid Aluminum alloy design
- Precision manufactured for more consistent results
- Fast magnetic bead separations
- Integrated bracket to help keep microplate in place and flat
- Made in USA
- For Research use only
- Full- skirt PCR plates
- 1/2- skirt PCR plates
- Un-skirted PCR plates
- Any magnetic beads
- Any common liquid handlers i.e. SPTLabtech Firefly®, Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.
Maximum – 150 µL
Minimum – 5 µL
96-Well Low Elution Ring Magnetic Plate
Designed for those labs wishing to separate magnetic beads into rings.
The Permagen ring magnet low elution plate with integrated cushion base plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation while the cushion assist compensates for labware inconsistencies.
SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
LE400
- SBS/ SLAS footprint
- Solid Aluminum alloy design
- Precision manufactured for more consistent results
- Fast magnetic bead separations
- Integrated bracket to help keep microplate in place and flat
- Made in USA
- For Research use only
- Full- skirt PCR plates
- 1/2- skirt PCR plates
- Un-skirted PCR plates
- Any magnetic beads
- Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.
Maximum – 150 µL
Minimum – 5 µL
96-Well Post Magnetic Plate
The Permagen Post magnet low elution plate was designed for use in manual or automation applications where volumes as low as 5 µL are required. The post magnets will create bead pellets to one quadrant of the well making aspiration easier and accidental bead disruption less likely
SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads