96-Well Bar Magnet Plates
Permagen offers an extensive line of Bar Magnetic Separation Plates in 96-Well format. They all feature the following benefits
- SBS/ANSI footprint to fit into Liquid Handling Robots
- Strong NdFeB Bar magnets for rapid bead separation
- Gripper clearance for automation use
- Solid aluminum design for durability and consistent results
- Made in the USA
A012424 (magnet plate only)
A012424KT (Includes top plate kit for 0.2 mL strips and tubes)
- SBS/ SLAS footprint for automation
- Solid Aluminum alloy design
- Precision manufactured for more consistent results
- Fast magnetic bead separations
- Beads are pulled to tube walls on same side for easy pipetting
- Integrated cushion base allowing for accidental contact between tips and well bottoms
- Made in USA
- For Research use only
- Full – Skirt PCR plates (manual or on liquid handler)
- Low Profile Semi-Skirt Plate
- Semi- Skirted PCR plates (manual only*)
- Non- Skirted PCR plates (manual only*)
- 0.2 mL PCR Strips and tubes (with kit, manual or on liquid handler)
- Any magnetic beads
- Any common liquid handlers i.e. Tecan®, SPT Labtech, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.
*only recommended for manual use as semi-, and non-skirted plates will not locate correctly into the nest but can be positioned against the magnet
Minimum – 5 µL
Maximum – 120 mL
96-Well Low Elution PCR side pull bar magnetic plate with integrated cushion base
Permagen’s XLE PCR-96 low volume bar magnet plate for PCR applications features an individual bar magnet for each row of wells, making it the perfect solution for hand pipetting as all of the pelleted beads will be to the same side in each row. With its SBS footprint and integrated cushion base, scaling up to the robot is a snap. Available in kit form as well, which includes our X39602 top plate for 0.2 mL tubes & strips
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
MSPU650
- SBS/ SLAS footprint
- Solid Aluminum alloy design
- Precision manufactured for more consistent results
- Fast magnetic bead separations
- Integrated corner brackets to help keep microplate in place
- Made in USA
- For Research use only
- Round bottom plates
- Pyramid bottom plates
- Flat Bottom plates
- Deep well plates
- PCR Plates (Full-skirt)
- Any magnetic beads
- Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc
Minimum – 30 µL (PCR Plate)
Maximum – 2 mL (Deep Well Plate)
96-Well Universal Bar Magnetic Plate
Permagen’s most universal bar magnet plate. From PCR plates to almost any microplate including deep well, flat bottom, pyramid bottom, round bottom, full-skirt PCR, and 1/2 skirt PCR the MSPU650 has you covered
SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic bead
MSPU650R
- SBS/ SLAS footprint
- Solid Aluminum alloy design
- Precision manufactured for more consistent results
- Fast magnetic bead separations
- Integrated corner brackets to help keep microplate in place
- Cushion base allowing tips to come in contact with well bottoms
- Made in USA
- For Research use only
- Round bottom plates
- Pyramid bottom plates
- Flat Bottom plates
- Deep well plates
- PCR Plates (Full-skirt)
- Any magnetic beads
- Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.
Minimum – 5 µL (PCR Plate)
Maximum – 2 mL (Deep Well Plate)
96-Well Universal Bar Magnetic Plate with Integrated Cushion base
Permagen’s MSPU650R is identical to the product shown above, with the exception of the added integrated cushion base which helps aid in robot and consumable labware inconsistencies for precision pipetting
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
MSP750 (Magnet Plate only)
MSP750KT (Includes top plate kit)
- SBS/ SLAS footprint
- Solid Aluminum alloy design
- Precision manufactured for more consistent results
- Fast magnetic bead separations
- Beads are pulled to tube walls for easy removal
- Made in USA
- For Research use only
- Full – Skirt PCR plates
- Semi- Skirted PCR plates
- Non- Skirted PCR plates
- 0.2 mL PCR Strips and tubes (With kit)
- Any magnetic beads
- Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.
Minimum – 30 µL
Maximum – 0.2 mL
96-Well PCR Side Pull Bar Magnetic Plate
The Permagen 96-Well Side Pull Bar Magnet PCR Separation Plate was designed for use in manual or automation applications where pulling beads to one side of the wells is essential. Also available in a kit form which includes our MTP96 clear top plate for 0.2 mL PCR tubes and strips.
Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added two angled, partial frames around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets when using an automated liquid handling robot.
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
MSP750R (magnet plate only)
MSP750RKT (Includes top plate kit for 0.2 mL strips and tubes)
- SBS/ SLAS footprint
- Solid Aluminum alloy design
- Precision manufactured for more consistent results
- Fast magnetic bead separations
- Beads are pulled to tube walls for easy removal
- Integrated cushion base allowing for accidental contact between tips and well bottoms
- Made in USA
- For Research use only
- Full – Skirt PCR plates
- Semi- Skirted PCR plates
- Non- Skirted PCR plates
- 0.2 mL PCR Strips and tubes (With kit)
- Any magnetic beads
- Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.
Minimum – 30 µL
Maximum – 0.2 mL
96-Well PCR side pull bar magnetic plate with integrated cushion base
Permagen’s MSPU750R is identical to the product shown above, with the exception of the added integrated cushion base which helps aid in robot, and consumable labware inconsistencies.
Also available in a kit form which includes our MTP96 clear top plate for 0.2 mL PCR tubes and strips.
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
MTP96
- SBS/ SLAS footprint
- Laser labeled rows and columns for easy sample control
- Precision manufactured for more consistent results
- Works with strips and individual tubes
- Made in USA
- For Research use only
- 8-strip 0.2 mL PCR Strips
- 12-strip 0.2 mL PCR Strips
- Individual PCR tubes
- PCR Plates (Unskirted-skirt)