Permagen Labware

96-Well Ring Magnet Plates

Permagen offers an extensive line of Ring Magnetic Separation Plates in 96-Well format. They all feature the following benefits

A011623

A011623KT (Kit for 0.2 ml tubes)

  • ANSI/ SBS footprint
  • Dual ring magnet technology 
  • Cushion base for added benefits
  • Solid Aluminum alloy design
  • Precision manufactured for more consistent results
  • Fast magnetic bead separations
  • Made in USA 
  • For Research use only
  • Round bottom plates 
  • Pyramid bottom plates 
  • Flat Bottom plates
  • Deep well plates
  • Full-, Semi-, and un-Skirted PCR Plates
  • Any magnetic beads
  • Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Maximum – 2 mL (Deep Well)

Minimum – 5 µL (PCR Plate)

X96 Dual Ring Magnetic Plate 96-well

Permagen’s most universal ring magnet plate. From Low elution PCR applications up to 2 mL deep well, the X96 has you covered. No need to purchase two separate plates anymore. Smaller inner ring magnet allows for volumes as low as 5 µL, larger outer magnet handles up to 2 mL deep well 

ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom, SBS/ SLAS fit on top to accept any microplate

Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable differences 

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads

A040523

A040523KT (Kit for 0.2 ml tubes)

  • ANSI/ SBS footprint
  • Compatible with 384-well and 96-well plates
  • Cushion base for added benefits
  • Solid Aluminum alloy design
  • Precision manufactured for more consistent results
  • Fast magnetic bead separations
  • Made in USA 
  • For Research use only
  • 384-well pcr plates
  • Some 384-well deep well plates
  • Full-, Semi-, and un-Skirted 96-well PCR Plates
  • Any magnetic beads
  • Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

384-Well PCR

Maximum – 39 µL 

Minimum – 5 µL 

__________

96-Well PCR

Maximum – 60 µL (0.2 mL for some beads)

Minimum – 4 µL

X396 Combo 384-well/96-Well Magnetic Plate

Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has  you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.

ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom. ANSI/SBS footprint on top to accept all common microplates.

Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable inconsistencies

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads 

U380 / U480 / U500

  • ANSI/ SBS footprint
  • Three magnet strengths for optimizing protocols 
  • Solid Aluminum alloy design
  • Precision manufactured for more consistent results
  • Fast magnetic bead separations
  • 4 mm bead -free ring at bottom of each well for easy removal
  • Made in USA 
  • For Research use only
  • Round bottom plates 
  • Pyramid bottom plates 
  • Flat Bottom plates
  • Deep well plates
  • PCR Plates
  • U380 – Up to 350 µL volumes
  • U480 – Up to 1000 µL volumes
  • U500 – Up to 2000 µL volumes
  • Any magnetic beads
  • Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

U380 – Maximum – 350 µL 

Minimum – 30 µL 

U480 – Maximum – 1 mL 

Minimum – 30 µL  

U500 – Maximum – 2 mL (Deep Well)

Minimum – 30 µL 

96-Well Universal Ring Magnetic Plate

Permagen’s most universal ring magnet plate. (without cushion base) From PCR plates to almost any microplate 

Available in three magnet strengths depending on your assay or protocol from 350 µL – 2 mL formats

ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom, SBS/ SLAS fit on top to accept any microplate

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads

S380 / S480 / S500

  • SBS/ SLAS footprint
  • Solid Aluminum alloy design
  • Precision manufactured for more consistent results
  • Fast magnetic bead separations
  • 4 mm bead free ring at bottom of each well for easy removal
  • Made in USA 
  • For Research use only
  • Round bottom plates 
  • Pyramid bottom plates 
  • PCR Plates
  • S380 – Up to 350 µL volumes
  • S480 – Up to 1000 µL volumes
  • S500 – Up to 2000 µL volumes
  • Any magnetic beads
  • Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

U380 – Maximum – 350 µL 

Minimum – 30 µL 

U480 – Maximum – 1 mL 

Minimum – 30 µL  

U500 – Maximum – 2 mL

Minimum – 30 µL 

 

96-Well Ring Magnetic Plate

Preferred by most scientists, the ring magnet plate is a versatile product that can be used manually or in automated liquid handlers when separating beads into rings is essential.

Available in three magnet strengths like our U500 above

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads

 

T480

  • SBS/ SLAS footprint
  • Solid Aluminum alloy design
  • Precision manufactured for more consistent results
  • Fast magnetic bead separations
  • 4 mm bead free ring at bottom of each well for easy removal
  • Made in USA 
  • For Research use only
  • Round bottom plates 
  • Pyramid bottom plates 
  • PCR Plates
  • Up to 1000 µL volumes
  • Any magnetic beads
  • Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Maximum – 1 mL 

Minimum – 30 µL

96-Well Ring Magnetic Plate (A32782)

Ideal magnet plate for those wishing to replace Beckman® PN: A32782. (50% Cost Savings*) Features all the same dimensions and even the same magnets. Does not include the spring base but it is the same height. Perfect for those using  robots that do not require springs. 

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads

* 50% cost savings based on current Beckman® list price of $1073 and Permagen list price of $539

MSP480R / MSP500R

  • SBS/ SLAS footprint
  • Solid Aluminum alloy design
  • Precision manufactured for more consistent results
  • Fast magnetic bead separations
  • 4 mm bead free ring at bottom of each well for easy removal
  • Integrated cushion for precise pipetting and maximum recovery
  • Made in USA 
  • For Research use only
  • Round bottom plates 
  • Pyramid bottom plates 
  • PCR Plates
  • MSP480R – Up to 1000 µL volumes
  • MSP500R – Up to 2000 µL volumes
  • Any magnetic beads
  • Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.
  •  

MSP480R Maximum – 1 mL 

Minimum – 30 µL

MSP500R Maximum – 2 mL 

Minimum – 30 µL

96-Well ring magnetic plate with integrated cushion base

Our most popular ring magnet plate. All of the features of our T480 magnet above with the added security of a cushion base  For faster separations you can upgrade to the MSP500R which comes with all of the same features, just stronger magnets Like our ring magnet plates above, this plate comes in two magnet strengths. Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
96S Super Magnet Plate

A092722

 

  • ANSI/ SBS footprint
  • Cushion base for added benefits
  • Held to OEM or better standards 
  • Precision manufactured for more consistent results
  • Fast magnetic bead separations
  • 4 mm bead free ring at bottom of each well for easy removal
  • Made in USA 
  • For Research use only
  • Round bottom plates 
  • Pyramid bottom plates 
  • PCR Plates
  • Volumes Up to 1000 µL volumes
  • Any magnetic beads
  • Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Maximum – 2 mL 

Minimum – 30 µL

96S Super Magnet Plate

Permagen’s direct replacement magnet plate for either PN: A32782 & A001322. Comes with spring cushion base and same strength magnets to meet current protocol requirements.  49% Cost savings

For faster separations you can upgrade to our SKU# MSP500R which comes with all of the same features, just stronger magnets

Compatible with any magnetic beads & all protocols requiring a 96S super magnet plate

* % cost savings based on current Beckman® list price of $1151 and Permagen list price of $585

NOTE: The base may be grey in color when you receive your plate as we are transitioning. 

96-Well Ring Magnet Plate Low Elution with Integrated Cushion Base

RLE500R

  • SBS/ SLAS footprint
  • Integrated cushion base for precise pipetting
  • Solid Aluminum alloy design
  • Precision manufactured for more consistent results
  • Fast magnetic bead separations
  • Integrated bracket to help keep microplate in place and flat
  • Made in USA 
  • For Research use only
  • Full- skirt PCR plates
  • 1/2- skirt PCR plates 
  • Un-skirted PCR plates
  • Any magnetic beads
  • Any common liquid handlers i.e. SPTLabtech Firefly®, Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Maximum  – 150 µL 

Minimum  – 5 µL 

96-Well Low Elution Ring Magnetic Plate With Integrated Cushion Base

The Permagen ring magnet low elution plate with integrated cushion base plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation while the cushion assist compensates for labware inconsistencies. 

SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot 

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads

96-Well Low Elution PCR Magnet

RLE500

  • SBS/ SLAS footprint
  • Solid Aluminum alloy design
  • Precision manufactured for more consistent results
  • Fast magnetic bead separations
  • Integrated bracket to help keep microplate in place and flat
  • Made in USA 
  • For Research use only
  • Full- skirt PCR plates
  • 1/2- skirt PCR plates 
  • Un-skirted PCR plates
  • Any magnetic beads
  • Any common liquid handlers i.e. SPTLabtech Firefly®, Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Maximum  – 150 µL 

Minimum  – 5 µL 

96-Well Low Elution Ring Magnetic Plate

Designed for those labs wishing to separate magnetic beads into rings.

The Permagen ring magnet low elution plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation

SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot 

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads

Products can be ordered and shipped worldwide using any of these methods. 

Receive Off

Any Two Products

Receive a 10% Discount when you purchase any two or more products. They do not have to be the same. Order Via. online shop, Purchase order, quote, or over the phone.