Permagen Labware

X396 LE Magnet Plate 96-/384-Well

Ideal magnet for all of your automated low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has  you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 5 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.


Low Elutions

As low as 5 µL from both 96-well, and 384-well PCR plates

Fast Separations

Strong NdFeB Ring Magnets ensure fast, precise separations

Integrated Cushion

Cushion base compensates lor labware and consumable inconsistencies

Robot Friendly

SBS/ ANSI footprint to fit into all liquid handling robots

Unique magnet design

  • Unique magnet structure allows for either 96-, or 384-Well Low Elution applications
  • Fast bead separations using strong NdFeB magnets
  • Compatible with standard 384-, and 96- well PCR Plates
  • Corner brackets to prevent microplates from slipping off magnets
  • Side cuts allowing liquid handling robot gripper 
  • ANSI/ SBS compliant footprint to fit into all liquid handlers
  • Integrated cushion base to help compensate for robot and labware inconsistences 
  • Made in the USA 


This magnet was designed to be compatible with common microplates, all liquid handler robots, and any magnetic beads

Application Note: If you purchase the kit, the top plate (that holds the PCR tubes) is simply lifted off the magnet plate, it is not attached.

Shown in kit form for 0.2 mL PCR tubes on Liquid Handling deck

Customer Testimonials

No testimonials yet, be the first

Drop us a customer testimonial and receive a 10% discount on your next order


Aluminum is much easier to make precision products out of then plastic. It stays flat and wont warp. This leads to more consistent results

For 96-Well PCR plates the pellets will form a ring about 2.5 mm in diameter up about 1mm from the well bottom

For a 384-Well PCR plate the beabs will be pulled to the side of each well.

This plate accepts PCR plates (Full-, Semi-, and Non-Skirted) and most 384-well PCR microplates. For best results, we recommend full-skirt 

Compatible with some pyramid bottom 384-well. 

Yes, this plate has a standard SBS/ ANSI compliant footprint to fit into any platforms. The only restriction would be the height

Yes, all Permagen products are available to be private labeled with your company logo/ part numbers for resale 

Products can be purchased at our online shop,  via. purchase order, over the phone, or by requesting a quote

Join our mailing list

Never miss any new products. We only send out new product releases and show announcements

Download Brochure
ProductDescription Cat No.
X396 LEX396 Low Volume 384-well/ 96-Well Low Elution Magnet PlateA040523
X396 LE KitX396 Low Volume 384-well/ 96-Well Low Elution Magnet Plate with PCR Tube KitA040523KT
Application Note: If you purchase the kit, the top plate (that holds the PCR tubes) is simply lifted off the magnet plate, it is not attached.

© 2024 All Rights Reserved.

10% Off

Any Two Products

Receive a 10% Discount when you purchase any two or more products. They do not have to be the same. Order Via. online shop, Purchase order, quote, or over the phone.