Permagen Labware

Permagen's Products

Separation racks, magnet plates, chiller blocks

If you would like to request a quote for ordering simply email us at info@permagenlabware.com, if you do not require a quote you can send purchase orders to the same email

We gladly accept the following methods of payment for online purchases:
Credit Card – through our secure checkout page
Bank Wire Transfer
Check/Money Order

If you are having trouble placing your order online with a credit card, please don’t hesitate to give us a call and we can process your card over the phone.

 All products are available for Worldwide shipping

All Products

Showing all 39 results

  • 0.2 mL PCR Strip Separators

    0.2 mL PCR 8 Strip Magnetic Separator 5 µL ~ 0.2 mL Volume

    $291.50 Add to cart

    Permagen’s Dual Volume 0.2 mL PCR Strip separator uses the same magnet configuration as our MSR812 rack, however, when using the opposite side, the magnets are positioned towards the bottom of the tubes allowing low elution’s to be achieved. Angled tube holes allow clean area at the front of the well for clean, fast aspiration without the concern of disturbing bead pellet

  • 0.2 mL PCR Strip Separators

    0.2 mL PCR Strip Magnetic Separator 24 tube

    $269.50 Add to cart

    Permagen’s 0.2 mL PCR Tube Magnetic rack is designed for magnetic bead separations from 0.2 mL individual tubes, 8-strip, or 12-strip PCR. Tubes are held at an angle and beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet. Accommodates any common PCR strips or individual PCR tubes.

  • 0.2 mL PCR Strip Separators

    32 Tube X 0.2 mL PCR Strip Magnetic Separator

    $395.00 Add to cart

    Permagen’s 32-tube PCR Separation rack features all of the same aspects of our MSR812 rack for easy protocol transition for labs wishing to scale up to four PCR strips at a time, or up to 32 individual PCR tubes

  • 0.2 mL PCR Strip Separators

    0.2 mL PCR Strip / 1.5 ml Microfuge Magnetic Separator

    $385.00 Add to cart

    Permagen’s 0.2 mL PCR / 1.5 mL Microcentrifuge tube separation rack is designed for labs with both PCR strip and 1.5 mL separation protocols. On the top, hold up to two of either 8 or 12 strips, or up to 24 individual tubes. Flip over and hold up to twelve 1.5 mL Microcentrifuge Tubes

  • Centrifuge Tube Separation Racks

    Centrifuge Tube Magnetic Separation Rack Two Position

    $264.00 Select options

    Available in three configurations, (2 x 15 mL – 2 x 50 mL – 1 of ea. 15 mL / 50 mL) the Centrifuge tube separation rack will pull beads to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet

  • Centrifuge Tube Separation Racks

    3x 15 mL / 50 mL Centrifuge Magnetic Separation Combo Rack

    $418.00 Add to cart

    Permagen’s  15 mL/ 50 mL Centrifuge Tube Magnetic Combo rack is designed for magnetic bead separations from up to three each, 15 mL or 50 mL Centrifuge tubes. Beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet. Accommodates any common 15 mL Centrifuge Tubes and or 50 mL Centrifuge Tubes

  • Centrifuge Tube Separation Racks

    SBS/ SLAS Adapter for 15 ml / 50 ml Centrifuge Racks

    $192.50 Add to cart

    Adapter to convert the base on our Centrifuge tube racks (SKU: MSR6X15, MSR6X50, MSR1550) to an SBS/ANSI footprint allowing large scale separations in an automated liquid handling robot

  • Centrifuge Tube Separation Racks

    6 X 15 mL Centrifuge Magnetic Separation Rack

    $418.00 Add to cart

    Permagen’s  15 mL Centrifuge Tube Magnetic rack is designed for magnetic bead separations from up to six, 15 mL Centrifuge tubes. Beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet. Accommodates any common 15 mL Centrifuge Tubes

  • 5 mL Centrifuge Tube Separator Rack

    8 X 5 mL Centrifuge Tube Magnetic Separator Rack

    $395.00 5 mL Racks

    Permagen’s 5 mL Centrifuge Tube Magnetic rack is designed for magnetic bead separations from up to Eight 5 mL Centrifuge Tubes

  • Centrifuge Tube Separation Racks

    6 X 50 mL Centrifuge Magnetic Separation Rack

    $418.00 Add to cart

    Permagen’s  50 mL Centrifuge Tube Magnetic rack is designed for magnetic bead separations from up to six, 50 mL Centrifuge tubes. Beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet. Accommodates any common 50 mL Centrifuge Tubes

     

  • Magnetic Separation Racks

    6 X 1.5 ml Microfuge Tube Magnetic Separation Rack

    $198.00 Add to cart

    Permagen’s 6 x 1.5 mL Microfuge Tube Magnetic rack is designed for magnetic bead separations from up to 6 Microcentrifuge PCR tubes. The tubes are angled and beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet. Accommodates many common 1.5 mL Microcentrifuge and some 2.0 mL tubes

  • Magnetic Separation Racks

    12 X 1.5 ml Microfuge Tube Magnetic Separation Rack

    $302.50 Add to cart

    Permagen’s 12 x 1.5 mL Microfuge Tube Magnetic rack is designed for magnetic bead separations from up to 12 Microcentrifuge PCR tubes. The tubes are angled and beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet. Accommodates many common 1.5 mL Microcentrifuge and some 2.0 mL tubes

  • Magnetic Separation Racks

    16 X 1.5 mL Microfuge Tube Magnetic Separation Stand

    $350.00 Add to cart

    Permagen’s 16 x 1.5 mL Microfuge Tube Magnetic rack is designed for magnetic bead separations from up to 16 tubes. Tubes are positioned 14mm between centers, allowing the use of an 8-channel, adjustable head pipette. 8 tubes per side also make for easy transition to and from microplates

  • Magnetic Separation Racks

    24 X 1.5 ml Microfuge Tube Magnetic Separation Stand

    $412.50 Add to cart

    Permagen’s 24 x 1.5 mL Microfuge Tube Magnetic rack is designed for magnetic bead separations from up to 24 Microcentrifuge PCR tubes. The tubes are angled and beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet. Accommodates many common 1.5 mL Microcentrifuge and some 2.0 mL tubes

  • 96- Well Magnet Plates

    96-Well 0.2 mL PCR Strip Rack SBS/ SLAS Footprint

    $159.50 Add to cart

    The Permagen 96-well 0.2 mL PCR Strip Rack was designed for use in manual or automation applications where strip tubes are required. It can also be used with our MSP750 MSP750R MSPU650R or MSPU650 magnet plates and is available as a discounted kit

  • 96- Well Magnet Plates

    96-Well Bar Magnet Plate Deep Well with Integrated Cushion Base

    $1,025.00$1,095.00 Select options

    Permagen’s most universal bar magnet plate. From PCR plates to almost any microplate including deep well, flat bottom, pyramid bottom, round bottom, full-skirt PCR, and 1/2 skirt PCR. Includes integrated cushion base for maximum recovery during automation

  • 96- Well Magnet Plates

    96-Well Bar Magnet Separation Plate Deep Well

    $875.00$962.00 Select options

    Permagen’s most universal bar magnet plate. From PCR plates to almost any microplate including deep well, flat bottom, pyramid bottom, round bottom, full-skirt PCR, and 1/2 skirt PCR the MSPU650 has you covered

  • 96- Well Magnet Plates

    96-Well Side Pull Bar Magnet PCR Plate with Integrated Cushion Base

    $905.00$975.00 Select options

    The Permagen 96-Well Side Pull Bar Magnet PCR Separation Plate was designed for use in manual and automation applications where pulling beads to one side of the wells is essential. Includes integrated cushion base for automation, which helps aid in labware inconsistencies

  • 96- Well Magnet Plates

    96-Well Side Pull Bar Magnet PCR Separation Plate

    $753.50$819.50 Select options

    The Permagen 96-Well Side Pull Bar Magnet PCR Separation Plate was designed for use in manual or automation applications where pulling beads to one side of the wells is essential. Also available in a kit form which includes our MTP96 clear top plate for 0.2 mL PCR tubes and strips.  

  • 96- Well Low Volume PCR

    96-Well Ring PCR Magnet Low Elution Plate

    $528.00 Add to cart

    The Permagen ring magnet low elution plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation

  • 96- Well Low Volume PCR

    96-Well Ring PCR Magnet Low Elution Plate with Cushion

    $630.00 Add to cart

    The Permagen ring magnet low elution plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation

  • 96- Well Low Volume PCR

    96-Well PCR Post Magnet Low Elution Plate

    $506.00 Add to cart

    The Permagen Post magnet low elution plate was designed for use in manual or automation applications where volumes as low as 5 µL are required. The post magnets will create bead pellets to one quadrant of the well making aspiration easier and accidental bead disruption less likely  

  • 24-Well Magnet Plates

    24- Well Ring Magnet Plate

    $522.50 Add to cart

    Permagen’s 24-Well magnetic separation plate was designed specifically for large volumes either manually or on a robotic platform. Dual ring magnet feature provide a ring of beads leaving the well bottoms clean for easy removal

  • 384-Well Magnet Plates

    384-Well Low Elution Post Magnet Plate

    $645.00 Add to cart

    The Permagen 384-well Low Elution post magnet plate was designed for use in manual or automation applications for high throughput PCR. Magnetic beads are pulled midway up onto well wall to help eliminate accidental bead pellet disruption and to achieve lower volumes. Includes integrated cushion base for maximum recovery during automation

  • 384-Well Magnet Plates

    384-Well Post Magnet Plate P384

    $495.00 Add to cart

    The Permagen 384-well post magnet plate was designed for use in manual or automation applications for high throughput PCR.  Magnetic beads are pulled high up onto well wall to help eliminate accidental bead pellet disruption 

  • 96- Well Magnet Plates

    96-Well Ring Magnet Plate

    $467.50$577.50 Select options

    Preferred by most scientists, the ring magnet plate is a versatile product that can be used manually or in automated liquid handlers when separating beads into rings is essential. Available in three magnet strengths to accommodate a wide range of protocol’s

  • 96- Well Magnet Plates

    96-Well Ring Magnet Plate with Integrated Cushion Base

    $678.00$728.00 Select options

    The Permagen 96-well ring magnet plate was designed for use in manual and automation applications. Available in two magnet strengths for a wide range of protocols and includes integrated cushion base for use in automation accommodating for labware inconsistencies.

  • 96- Well Magnet Plates

    96S Super Magnet Plate 96-Well

    $595.00 Add to cart

    The Permagen 96S Super Magnet SPRIplate was designed for manual and automation applications. Comes fitted with spring cushion technology to help aid in automation processes. Direct replacement for the A32782 from Beckman® (currently $1151.00), a 49% savings in cost. Need more info? Call to speak with us today

  • ↓ 10% Quick View
    96- Well Magnet Plates

    96-Well Ring Magnet Plate T480

    $485.00 Add to cart

    Ideal magnet plate for those wishing to replace Beckman® PN: A32782. at a 57% cost savings compared to $1131.00. Features all the same dimensions and even the same magnets. Does not include the spring base but it is the same height. Perfect for those using robots that do not require spring cushion. For the exact replacement see our SKU: A092722 plate

  • 96- Well Magnet Plates

    0.2 mL PCR Tube Stand ANSI/SBS

    $140.00$145.00 Select options

    The Permagen 0.2 mL PCR Tube Stand was designed to fit our X96 or X396 Magnet plate, however, it may also be used as a stand-alone plate for use in manual and automation applications for 0.2 mL PCR strips & tubes

  • 96- Well Low Volume PCR

    96-Well PCR Low Elution Bar Magnet Plate Side Pull

    $780.00 Read more

    Coming Soon! Ideal magnet for Low elution 96-well PCR applications where volumes as low as 4 µL are required.  Strong NdFeB bar magnets are located on the same sides of the wells, making hand pipetting a breeze. Also ideal for liquid handlers with integrated cushion base. Pulling beads to the well sides is also less susceptible to accidental bead aspiration 

  • 96- Well Magnet Plates

    96-Well Universal Ring Magnet Plate

    $605.00$748.00 Select options

    From PCR plates to almost any microplate, the U-series plate is one of Permagen’s most universal ring magnet plates.  Available in three magnet strengths depending on your assay or protocol from 350 µL – 2 mL formats. ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot 

  • 384-Well Magnet Plates

    X396 Low Volume 384-well/ 96-Well Low Elution Magnet Plate

    $140.00$990.00 Select options

    Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has  you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.

  • 96- Well Magnet Plates

    X96 Dual Ring Magnet Plate 96-Well

    $145.00$1,145.00 Select options

    Permagen’s most universal ring magnet plate. From Low elution PCR applications up to 2 mL deep well, the X96 has you covered. No need to purchase two or more separate plates anymore. Smaller inner ring magnet allows for volumes as low as 5 µL, larger outer magnet handles up to 2 mL deep well 

  • Cooling/ Heating Blocks

    1.5 ml – 2 mL, 24- Tube Chiller Block

    $225.00 Add to cart

    Permagen’s SBS/ANSI footprint 24-Tube thermal block allows the use of up to twenty four 1.5 mL -2 mL Microcentrifuge tubes, or screw-cap vials for keeping sample temperatures consistent. Can be used for heating as well

  • Cooling/ Heating Blocks

    96-Well PCR Plate / 0.2 mL Strip Chiller Block

    $245.00 Add to cart

    The Permagen 96-Well Chiller Block was designed as a temperature control device that can be used manually or on a liquid handling robot for PCR applications from individual 0.2 mL Tubes, 0.2 mL strips, or PCR plates.

  • 0.2 mL PCR Strip Separators

    PCR Strip to SBS/ ANSI Adapter Plate for Automation

    $190.00 Add to cart

    For use with the Permagen MSR812 racks, this SBS/ANSI footprint adapter will convert either one or two racks for automation

  • Cooling/ Heating Blocks

    Thermal Combo Block 1.5 mL 0.2 mL PCR Chiller

    $255.00 Add to cart

    Permagen’s Thermal Combo Block 1.5 mL, 0.2 mL PCR was designed as a temperature control device that can be used manually or on a liquid handling robot

  • Accessories

    Reagent Trough Birdfeeder Cartridge and Bottle

    $282.00$2,750.00 Select options

    A reagent dispensing device which allows a full liter of constant reagent delivery

Get in touch

Leave your name and email below along with what you are looking for in the message box. Or you can call us at +1-978-914-4943

10% Off

Any Two Products

Receive a 10% Discount when you purchase any two or more products. They do not have to be the same. Order Via. online shop, Purchase order, quote, or over the phone.