96-Well Magnet Plates
Permagen Offers a wide variety of 96-well magnets to suit all of your lab needs
-
Quick View0.2 mL PCR Tube Stand ANSI/SBS
$140.00 – $145.00The Permagen 0.2 mL PCR Tube Stand was designed to fit our X96 or X396 Magnet plate, however, it may also be used as a stand-alone plate for use in manual and automation applications for 0.2 mL PCR strips & tubes
Our most flexible magnet plate. The dual ring magnet technology allows low elution from PCR plates with the use of the inner magnets, while the outer magnets can handle your larger volumes. Includes cushion base to help eliminate robot, and labware inconsistencies allowing for precise pipetting and maximum recovery
- Full-, Semi-, and Non-skirted PCR plates – volumes 5 µL – 0.2 mL
- Standard well plates with Flat-, Round-, Pyramid-, and V-Bottom – Volumes up to 2 mL
- Deep well plates
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick ViewX96 Dual Ring Magnet Plate 96-Well with Integrated Cushion Base
$145.00 – $1,145.00Permagen’s most universal ring magnet plate. From Low elution PCR applications up to 2 mL deep well, the X96 has you covered. No need to purchase two or more separate plates anymore. Smaller inner ring magnet allows for volumes as low as 5 µL, larger outer magnet handles up to 2 mL deep well
Great all-around magnet plate. Compatible with all protocols requiring a 96S Super Magnet Plate. Suitable for most applications, this plate is one of the most commonly used magnet plates. Includes spring cushion base to help eliminate robot, and labware inconsistencies allowing for precise pipetting and maximum recovery
- Full-, Semi-, and Non-skirted PCR plates – volumes 30 µL – 0.2 mL
- Standard well plates with Round-, Pyramid-, and V-Bottom – Volumes up to 1 mL
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
Please email us for a list of part numbers that this plate replaces
-
Quick View6 X 15 mL Centrifuge Magnetic Separation Rack
$418.00Permagen’s 15 mL Centrifuge Tube Magnetic rack is designed for magnetic bead separations from up to six, 15 mL Centrifuge tubes. Beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet. Accommodates any common 15 mL Centrifuge Tubes
Suitable for most applications, this plate comes in three different magnet strengths to match your protocols.
- Full-, Semi-, and Non-skirted PCR plates – volumes 30 µL – 0.2 mL
- Standard well plates with Round-, Pyramid-, and V-Bottom – Volumes up to 350 µL, 1 mL, or 2 mL
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick View3x 15 mL / 50 mL Centrifuge Magnetic Separation Combo Rack
$418.00Permagen’s 15 mL/ 50 mL Centrifuge Tube Magnetic Combo rack is designed for magnetic bead separations from up to three each, 15 mL or 50 mL Centrifuge tubes. Beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet. Accommodates any common 15 mL Centrifuge Tubes and or 50 mL Centrifuge Tubes
Universal magnet having corner brackets allowing more flexibility when choosing microplates. Extended base for a higher stance saving “Z” travel and for robots with deeper nests. Available in three magnet strengths for matching your protocols
- Full-, Semi-, and Non-skirted PCR plates – volumes 30 µL – 0.2 mL
- Standard well plates with Flat-, Round-, Pyramid-, and V-Bottom – Volumes up to 2 mL
- Three max volume magnet strength plates (350 µL, 1 mL, and 2 mL options)
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick View96-Well Ring Magnet Plate
$467.50 – $577.50Preferred by most scientists, the ring magnet plate is a versatile product that can be used manually or in automated liquid handlers when separating beads into rings is essential. Available in three magnet strengths to accommodate a wide range of protocol's
Specifically designed as a drop in premium, less expensive magnet plate for the Biomek® work stations using same magnets and dimensions. No modifications necessary to your robot or protocol. No screws, springs, or moving parts to worry about (replaces A32782). If you need the added cushion, you can purchase ours (SKU: A092722)
- Full-, Semi-, and Non-skirted PCR plates – volumes 30 µL – 0.2 mL
- Standard well plates with Round-, Pyramid-, and V-Bottom – Volumes up to 1 mL
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick View
Ideal magnet plate for low elution (down to 5 µL) from PCR plates. Unlike our post magnet low elution plate, this plate has a “wall” around the top driving the microplate to the correct position on the magnet and keeping it there
- Full-, Semi-, and Non-skirted PCR plates – volumes 5 µL – 0.2 mL
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick View96-Well PCR Plate / 0.2 mL Strip Chiller Block
$245.00The Permagen 96-Well Chiller Block was designed as a temperature control device that can be used manually or on a liquid handling robot for PCR applications from individual 0.2 mL Tubes, 0.2 mL strips, or PCR plates.
All-around magnet plate. Suitable for most applications, this plate is one of our most commonly used magnet plates and is available in two magnet strengths to better meet your protocol. Includes cushion base to help eliminate robot, and labware inconsistencies allowing for precise pipetting and maximum recovery
- Full-, Semi-, and Non-skirted PCR plates – volumes 30 µL – 0.2 mL
- Standard well plates with Round-, Pyramid-, and V-Bottom – Volumes up to 1 mL, and 2 mL
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick View96-Well Side Pull Bar Magnet PCR Plate with Integrated Cushion Base
$905.00 – $975.00The Permagen 96-Well Side Pull Bar Magnet PCR Separation Plate was designed for use in manual and automation applications where pulling beads to one side of the wells is essential. Includes integrated cushion base for automation, which helps aid in labware inconsistencies
Our most flexible Bar magnet plate. Perfect choice for those wishing to capture beads to the sides of wells making aspiration easier over ring magnets. Includes cushion base to help eliminate robot, and labware inconsistencies allowing for precise pipetting and maximum recovery
- Full- Skirt PCR plates – volumes 30 µL – 0.2 mL
- Standard well plates with Flat-, Round-, Pyramid-, and V-Bottom – Volumes up to 2 mL
- Deep well plates
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick View96S Super Magnet Plate 96-Well with Cushion Base
$595.00The Permagen 96S Super Magnet SPRIplate was designed for manual and automation applications. Comes fitted with spring cushion technology to help aid in automation processes. Direct replacement for the A32782 from Beckman® (currently $1151.00), a 49% savings in cost. Need more info? Call to speak with us today
Designed specifically for PCR plates allowing users to capture beads to the sides of wells making aspiration easier over ring magnets. Includes cushion base to help eliminate robot, and labware inconsistencies allowing for precise pipetting and maximum recovery
- Full-, Semi-, and Non- Skirted PCR plates – volumes 30 µL – 0.2 mL
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick View0.2 mL PCR 8 Strip Magnetic Separator 5 µL ~ 0.2 mL Volume
$291.50Permagen’s Dual Volume 0.2 mL PCR Strip separator uses the same magnet configuration as our MSR812 rack, however, when using the opposite side, the magnets are positioned towards the bottom of the tubes allowing low elution’s to be achieved. Angled tube holes allow clean area at the front of the well for clean, fast aspiration without the concern of disturbing bead pellet
Designed specifically for PCR plates allowing users to capture beads to the sides of wells making aspiration easier over ring magnets.
- Full-, Semi-, and Non- Skirted PCR plates – volumes 30 µL – 0.2 mL
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick View16 X 1.5 mL Microfuge Tube Magnetic Separation Stand
$350.00Permagen’s 16 x 1.5 mL Microfuge Tube Magnetic rack is designed for magnetic bead separations from up to 16 tubes. Tubes are positioned 14mm between centers, allowing the use of an 8-channel, adjustable head pipette. 8 tubes per side also make for easy transition to and from microplates
Multi-use Bar magnet plate from PCR plates to Deep well plates and everything in between. Perfect choice for those wishing to capture beads to the sides of wells making aspiration easier over ring magnets.
- Full- Skirt PCR plates – volumes 30 µL – 0.2 mL
- Standard well plates with Flat-, Round-, Pyramid-, and V-Bottom – Volumes up to 2 mL
- Deep well plates
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick View8 X 5 mL Centrifuge Tube Magnetic Separator Rack
$395.00Permagen’s 5 mL Centrifuge Tube Magnetic rack is designed for magnetic bead separations from up to Eight 5 mL Centrifuge Tubes
Ideal solution for 96-well PCR plates as well as 384-well plates. 96-well plates use the inside of the ring magnet to separate beads while the outside can be used for 384-well microplates
- Full-, Semi-, and Non-skirted 96-well PCR plates – volumes 5 µL – 0.2 mL
- 384-well PCR plates and some deep well 384 plate
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick ViewPCR Strip to SBS/ ANSI Adapter Plate for Automation
$190.00For use with the Permagen MSR812 racks, this SBS/ANSI footprint adapter will convert either one or two racks for automation
Best for low elution (down to 5 µL) from PCR plates for those wishing to collect beads to the sides of the wells.
- Full-, Semi-, and Non-skirted PCR plates – volumes 5 µL – 0.2 mL
- All liquid handling robots with standard ANSI/SBS nest
- All magnetic beads
-
Quick ViewSBS/ SLAS Adapter for 15 ml / 50 ml Centrifuge Racks
$192.50Adapter to convert the base on our Centrifuge tube racks (SKU: MSR6X15, MSR6X50, MSR1550) to an SBS/ANSI footprint allowing large scale separations in an automated liquid handling robot
A must have plate that can be used with our bar magnet plates allowing the use of 0.2 mL PCR tubes
- 0.2 mL Individual Tubes
- 0.2 mL PCR Strips (up to twelve 8-strip
- Works with: MSP750, MSPU650, MSP750R, and MSPU650R
-
Quick ViewReagent Trough Birdfeeder Cartridge and Bottle
$282.00 – $2,750.00A reagent dispensing device which allows a full liter of constant reagent delivery
A must have addition that can be used with our X96 magnet plate allowing the use of 0.2 mL PCR tubes, or can be used alone on the bench or in an automated liquid handler
- 0.2 mL Individual Tubes
- 0.2 mL PCR Strips (up to twelve 8-strip
- Works with: X96 SKU: A011623
