Permagen Labware



96-Well Magnet Plates

Permagen Offers a wide variety of 96-well magnets to suit all of your lab needs
  • Quick View

    X396 Low Volume 384-well/ 96-Well Low Elution Magnet Plate

    $140.00$990.00
    Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has  you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.

Our most flexible magnet plate. The dual ring magnet technology allows low elution from PCR plates with the use of the inner magnets, while the outer magnets can handle your larger volumes.  Includes cushion base to help eliminate robot, and labware inconsistencies allowing for precise pipetting and maximum recovery

  • Full-, Semi-, and Non-skirted PCR plates – volumes 5 µL – 0.2 mL
  • Standard well plates with Flat-, Round-, Pyramid-, and V-Bottom – Volumes up to 2 mL
  • Deep well plates
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads

Great all-around magnet plate. Compatible with all protocols requiring a 96S Super Magnet Plate. Suitable for most applications, this plate is one of the most commonly used magnet plates. Includes spring cushion base to help eliminate robot, and labware inconsistencies allowing for precise pipetting and maximum recovery

  • Full-, Semi-, and Non-skirted PCR plates – volumes 30 µL – 0.2 mL
  • Standard well plates with Round-, Pyramid-, and V-Bottom – Volumes up to 1 mL
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads

Please email us for a list of part numbers that this plate replaces

  • 15 mL 50 ML Centrifuge Tube Magnetic separator rack
    Quick View

    3x 15 mL / 50 mL Centrifuge Magnetic Separation Combo Rack

    $418.00
    Permagen’s  15 mL/ 50 mL Centrifuge Tube Magnetic Combo rack is designed for magnetic bead separations from up to three each, 15 mL or 50 mL Centrifuge tubes. Beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet. Accommodates any common 15 mL Centrifuge Tubes and or 50 mL Centrifuge Tubes

Suitable for most applications, this plate comes in three different magnet strengths to match your protocols.

  • Full-, Semi-, and Non-skirted PCR plates – volumes 30 µL – 0.2 mL
  • Standard well plates with Round-, Pyramid-, and V-Bottom – Volumes up to 350 µL, 1 mL, or 2 mL
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads
  • 96-Well Ring Magnetic Plate Separator
    Quick View

    96-Well Ring Magnet Plate

    $467.50$577.50
    Preferred by most scientists, the ring magnet plate is a versatile product that can be used manually or in automated liquid handlers when separating beads into rings is essential. Available in three magnet strengths to accommodate a wide range of protocol's

Universal magnet having corner brackets allowing more flexibility when choosing microplates. Extended base for a higher stance saving “Z” travel and for robots with deeper nests. Available in three magnet strengths for matching your protocols 

  • Full-, Semi-, and Non-skirted PCR plates – volumes 30 µL – 0.2 mL
  • Standard well plates with Flat-, Round-, Pyramid-, and V-Bottom – Volumes up to 2 mL
  • Three max volume magnet strength plates (350 µL, 1 mL, and 2 mL options)
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads
  • 96-Well Universal Magnet Plate
    Quick View

    96-Well Universal Ring Magnet Plate

    $605.00$748.00
    From PCR plates to almost any microplate, the U-series plate is one of Permagen’s most universal ring magnet plates.  Available in three magnet strengths depending on your assay or protocol from 350 µL – 2 mL formats. ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot 

Specifically designed as a drop in premium, less expensive magnet plate for the Biomek® work stations using same magnets and dimensions. No modifications necessary to your robot or protocol.  No screws, springs, or moving parts to worry about (replaces A32782). If you need the added cushion, you can purchase ours (SKU: A092722)

  • Full-, Semi-, and Non-skirted PCR plates – volumes 30 µL – 0.2 mL
  • Standard well plates with Round-, Pyramid-, and V-Bottom – Volumes up to 1 mL
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads
  • 96-Well Side Pull Bar Magnet PCR Plate
    Quick View

    96-Well Side Pull Bar Magnet PCR Separation Plate

    $753.50$819.50
    The Permagen 96-Well Side Pull Bar Magnet PCR Separation Plate was designed for use in manual or automation applications where pulling beads to one side of the wells is essential. Also available in a kit form which includes our MTP96 clear top plate for 0.2 mL PCR tubes and strips.  

Ideal magnet plate for low elution (down to 5 µL) from PCR plates. Unlike our post magnet low elution plate, this plate has a “wall” around the top driving the microplate to the correct position on the magnet and keeping it there

  • Full-, Semi-, and Non-skirted PCR plates – volumes 5 µL – 0.2 mL
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads

All-around magnet plate. Suitable for most applications, this plate is one of our most commonly used magnet plates and is available in two magnet strengths to better meet your protocol. Includes cushion base to help eliminate robot, and labware inconsistencies allowing for precise pipetting and maximum recovery

  • Full-, Semi-, and Non-skirted PCR plates – volumes 30 µL – 0.2 mL
  • Standard well plates with Round-, Pyramid-, and V-Bottom – Volumes up to 1 mL, and 2 mL
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads
  • Quick View

    96-Well Ring Magnet Plate with Integrated Cushion Base

    $678.00$728.00

    The Permagen 96-well ring magnet plate was designed for use in manual and automation applications. Available in two magnet strengths for a wide range of protocols and includes integrated cushion base for use in automation accommodating for labware inconsistencies.

Our most flexible Bar magnet plate. Perfect choice for those wishing to capture beads to the sides of wells making aspiration easier over ring magnets. Includes cushion base to help eliminate robot, and labware inconsistencies allowing for precise pipetting and maximum recovery

  • Full- Skirt PCR plates – volumes 30 µL – 0.2 mL
  • Standard well plates with Flat-, Round-, Pyramid-, and V-Bottom – Volumes up to 2 mL
  • Deep well plates
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads
  • Quick View

    96-Well PCR Plate / 0.2 mL Strip Chiller Block

    $245.00
    The Permagen 96-Well Chiller Block was designed as a temperature control device that can be used manually or on a liquid handling robot for PCR applications from individual 0.2 mL Tubes, 0.2 mL strips, or PCR plates.

Designed specifically for PCR plates allowing users to capture beads to the sides of wells making aspiration easier over ring magnets. Includes cushion base to help eliminate robot, and labware inconsistencies allowing for precise pipetting and maximum recovery

  • Full-, Semi-, and Non- Skirted PCR plates – volumes 30 µL – 0.2 mL
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads

Designed specifically for PCR plates allowing users to capture beads to the sides of wells making aspiration easier over ring magnets. 

  • Full-, Semi-, and Non- Skirted PCR plates – volumes 30 µL – 0.2 mL
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads
  • 32 position 0.2 mL PCR Separator rack
    Quick View

    32 Tube X 0.2 mL PCR Strip Magnetic Separator

    $395.00
    Permagen’s 32-tube PCR Separation rack features all of the same aspects of our MSR812 rack for easy protocol transition for labs wishing to scale up to four PCR strips at a time, or up to 32 individual PCR tubes

Multi-use Bar magnet plate from PCR plates to Deep well plates and everything in between. Perfect choice for those wishing to capture beads to the sides of wells making aspiration easier over ring magnets. 

  • Full- Skirt PCR plates – volumes 30 µL – 0.2 mL
  • Standard well plates with Flat-, Round-, Pyramid-, and V-Bottom – Volumes up to 2 mL
  • Deep well plates
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads
  • Quick View

    0.2 mL PCR Tube Stand ANSI/SBS

    $140.00$145.00
    The Permagen 0.2 mL PCR Tube Stand was designed to fit our X96 or X396 Magnet plate, however, it may also be used as a stand-alone plate for use in manual and automation applications for 0.2 mL PCR strips & tubes

Ideal solution for 96-well PCR plates as well as 384-well plates. 96-well plates use the inside of the ring magnet to separate beads while the outside can be used for 384-well microplates

  • Full-, Semi-, and Non-skirted 96-well PCR plates – volumes 5 µL – 0.2 mL
  • 384-well PCR plates and some deep well 384 plate
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads
  • 24-Well Ring Magnet Plate Separator
    Quick View

    24- Well Ring Magnet Plate

    $522.50
    Permagen’s 24-Well magnetic separation plate was designed specifically for large volumes either manually or on a robotic platform. Dual ring magnet feature provide a ring of beads leaving the well bottoms clean for easy removal

Best for low elution (down to 5 µL) from PCR plates for those wishing to collect beads to the sides of the wells. 

  • Full-, Semi-, and Non-skirted PCR plates – volumes 5 µL – 0.2 mL
  • All liquid handling robots with standard ANSI/SBS nest
  • All magnetic beads
  • 0.2 mL PCR 8 Strip Magnetic Separator 5 µL ~ 0.2 mL Volume
    Quick View

    0.2 mL PCR 8 Strip Magnetic Separator 5 µL ~ 0.2 mL Volume

    $291.50
    Permagen’s Dual Volume 0.2 mL PCR Strip separator uses the same magnet configuration as our MSR812 rack, however, when using the opposite side, the magnets are positioned towards the bottom of the tubes allowing low elution’s to be achieved. Angled tube holes allow clean area at the front of the well for clean, fast aspiration without the concern of disturbing bead pellet

A must have plate that can be used with our bar magnet plates allowing the use of 0.2 mL PCR tubes 

  • 0.2 mL Individual Tubes
  • 0.2 mL PCR Strips (up to twelve 8-strip
  • Works with: MSP750, MSPU650, MSP750R, and MSPU650R

A must have addition that can be used with our X96 magnet plate allowing the use of 0.2 mL PCR tubes, or can be used alone on the bench or in an automated liquid handler

  • 0.2 mL Individual Tubes
  • 0.2 mL PCR Strips (up to twelve 8-strip
  • Works with: X96 SKU: A011623

Products can be ordered and shipped worldwide using any of these methods to place your order. 

10% Off

Any Two Products

Receive a 10% Discount when you purchase any two or more products. They do not have to be the same. Order Via. online shop, Purchase order, quote, or over the phone.